Proper maintenance of wire rope pulling hoist tips

Wire rope pulling hoist lifting equipment is widely used one, there are lifting, pulling, tensioning three functions, high safety factor, long service life. Good maintenance methods help to prolong the life of lever  manual hoist .
So how to better maintain the wire rope pulling hoist, the following points for you, I hope for your help:


Wire rope pulling hoist maintenance

1, each job is completed, we must first wipe the loose end of the rope on the adhesion of mud,lift hoist dust or grease, loosen the jaw, out of wire rope, wire rope sequence will gather around the shelves, and wipe the length of wire rope, wire rope stored in dry place to prevent corrosion.

2 year deal at least four times a gourd maintenance treatment, such as diesel cleaning parts, and calcium-based grease lubrication.

3, when the internal movement poured into the mud, cement or other dirt, use a rinse, then clean diesel; cleaning, dry calcium-based grease on the grease; finally release the jaws,wire rope winch wipe with a clean cotton pliers mouth of grease and moisture.

4, when the jaws wear, carrying capacity is less than 80% of rated load, replace the jaw; when the wire rope diameter is reduced 10%, the rope should be replaced