Periodic examination of special equipment

(A) Conditions
Special equipment for periodic inspection, in addition to the necessary equipment ready for data, but also should have the following basic requirements:
1 was seized equipment in accordance with the provisions of the clean-up, costumes, media drained,chain block and with other related equipment for the reliable isolation;
2 containing flammable, toxic equipment for the replacement, and, disinfection, cleaning, and maintaining of qualified;
3 need to open, disassemble, has been completed in accordance with regulations;
4, high-temperature cooling device has been reliably meet the conditions of work;
5. Need to set up quarantine, isolation has been carried out, and set up safety signs;
6 Prepare the required power, water and other energy sources;
7 Determine the coordination and monitoring personnel, security measures.
8 large equipment on larger quantities or periodical surveys, you need to set the scene inspection office space should be provided office space.
The establishment of specialized inspection and testing base for mobile devices periodic inspection, and its preparation work is generally carried out by the inspection agency, applicant be required.
Specific conditions and requirements, see special equipment associated periodic inspection rules of technical safety.
(Two) Implementing Agency
AQSIQ approved special equipment inspection and testing organizations.
Specific implementing agencies by the State Administration of Quality Supervision, Provincial Quality and Technical Supervision plan to the public.
(Three) Program
Periodic inspection including application of special equipment, periodic inspection,load chain an inspection report and other procedures:
1 Applicants
The use of special equipment should be in accordance with production units and equipment, regular inspection cycle, make arrangements for inspection plan and the tax return (on relevant sites download), apply to the inspection and testing institutions, return the device at the same time submit registration authorities.
(2) accept
Following a review of inspection and testing agency qualified to be accepted, arrange inspection and notify the applicant; does not comply with the conditions of, and the reasons inadmissible.
3 periodic inspection
Site inspection, the use of units shall be equipped with personnel monitoring and coordination, and prepare the following information:
(A) equipment archives;
(2) equipment operation, maintenance and other records.
Inspection agency shall arrange to meet the requirements of the inspection personnel regularly inspected.
Periodic inspection in accordance with the relevant rules of special equipment for periodic inspection.
4 inspection report
Inspection and testing institutions tested for safety equipment performance evaluation, inspection reports issued by the appropriate certificate or; Upon examination, found that there are hidden dangers need to be improved, sentenced to waste, it should be reported to the local quality and technical supervision departments.
(Five) deadline
1. Equipment safety inspection unit shall before the expiry of one month to the inspection agencies inspection applications. Receiving inspection and testing institution shall declare in 5 working days to make arrangements to receive and plan to ensure timely completion of periodic inspection.
(2) periodic inspection work is completed, general equipment should be 10 working days to issue a periodic inspection report or certificate, large equipment can be 30 working days of an inspection report or certificate.wire rope hoist On the need for timely inspection equipment put into operation, inspection and testing agency personnel engaged in inspection work is completed within 5 days after, issued by the periodic inspection and preliminary conclusions representations responsible.
3 Use the unit on the test disagrees with the conclusion, you can receive the inspection report (or preliminary conclusions representations) within 15 working days after written comments.